Router MIKROTIK PowerBox (RB750P-PBr2)

For networking, the PowerBox has 5 Ethernet 10/100 Auto-MDI / X ports with screen. External operation of the device involves the use of a shielded twisted pair and, if necessary, a lightning protection module. By default, the 1st port is assigned to WAN, the remaining 4 are LAN ports. Since the device works under the control of full-fledged RouterOS Level 4, you can change the configuration of the ports as you like. Ports 2 to 5 can be used to power external devices via PoE (PoE Out). The maximum load per port is no more than 1A, the total load on all ports is no more than 2A. Such indicators allow you to connect to the ports a device with a fairly high consumption. Application of RB750P-PBr2 In practice, the RB750P-PBr2 allows you to connect up to 4 Mikrotik SXT and/or Groove devices. You can connect other devices via PoE, the main thing is that they support the Passive PoE standard (+4.5; -7.8) and the power supply voltage supplied to the PowerBox (from 6 to 30V). In general, the PowerBox RB750P-PBr2 is a reliable solution for routing and supplying power to external devices via PoE, which allows you to simplify the connection of additional equipment and save you from unnecessary wires. This functionality is very useful when you need to create a small entry-level base station, or a relay to connect 2 wireless bridges. Built-in sensors allow you to monitor the internal temperature, power supply voltage of the device, which, in the presence of SNMP, will allow you to integrate the device with a network monitoring system, for example, with PRTG Network Monitor.